EasyManuals Logo

Chroma 63600 Series User Manual

Default Icon
258 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #184 background imageLoading...
Page #184 background image
Programmable DC Electronic Load 63600 Series Operation & Programming Manual
5-52
Query Syntax: CURRent:STATic:RISE?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = A/μs]
Query Example: CURR:STAT:RISE?
CURR:STAT:RISE? MAX
CURR:STAT:RISE? MIN
CURRent:SWEep:DUTY
Type: Channel-Specific
Description: Set the duty cycle for constant current frequency sweep mode.
Setting Syntax: CURRent:SWEep:DUTY<space><NRf+>
Setting Parameters:<NRf+>, 1% ~ 99%, Resolution = 1%
Setting Example: CURR:SWE:DUTY 50 Set duty cycle = 50%
CURR:SWE:DUTY MAX Set duty cycle = maximum value.
CURR:SWE:DUTY MIN Set duty cycle = minimum value.
Query Syntax: CURRent:SWEep:DUTY?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = None]
Query Example: CURR:SWE:DUTY?
CURR:SWE:DUTY? MAX
CURR:SWE:DUTY? MIN
CURRent:SWEep:DWELl
Type: Channel-Specific
Description: Set the dwell time for constant current frequency sweep mode.
Setting Syntax: CURRent:SWEep:DWELl<space><NRf+>[suffix]
Setting Parameters:<NRf+>, 1ms ~ 100s, Resolution = 1ms, Unit = Second
Setting Example: CURR:SWE:DWEL 50 Set dwell time = 50s
CURR:SWE:DWEL 500ms Set dwell time = 0.5s
CURR:SWE:DWEL MAX Set dwell time = maximum value.
CURR:SWE:DWEL MIN Set dwell time = minimum value.
Query Syntax: CURRent:SWEep:DWELl?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = Second]
Query Example: CURR:SWE:DWEL?
CURR:SWE:DWEL? MAX
CURR:SWE:DWEL? MIN
CURRent:SWEep:FALL
Type: Channel-Specific
Description: Set the falling slew rate of current for constant current frequency
sweep mode.
Setting Syntax: CURRent:SWEep:FALL<space><NRf+>[suffix]
Setting Parameters:Refer to respective specification for valid value range.
Setting Example: CURR:SWE:FALL 2.5 Set falling slew rate to 2.5A/μs.
CURR:SWE:FALL 1A/μs Set falling slew rate to 1A/μs.
CURR:SWE:FALL MAX Set falling slew rate to the
maximum value of static load.
CURR:SWE:FALL MIN Set falling slew rate to the
minimum value of static load.
Query Syntax: CURRent:SWEep:FALL?[<space><MAX | MIN>]
Return Parameters:<NR2>, [Unit = A/μs]
Query Example: CURR:SWE:FALL?
CURR:SWE:FALL? MAX
CURR:SWE:FALL? MIN
CURRent:SWEep:FEND

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Chroma 63600 Series and is the answer not in the manual?

Chroma 63600 Series Specifications

General IconGeneral
Series63600
Operating Temperature0°C to 40°C
ModesCC, CV
InterfaceGPIB, USB
ProtectionOCP, OTP, OVP
Voltage Resolution1mV
CoolingForced Air

Related product manuals