CIAT FLOWAY - The Room Terminal (Option); Controls; E N

EN-5
EN
1.3 The room terminal (Option)
The terminal supplied is equipped with a digital display, 4 buttons and a rotary encoder.
Once installed in the premises, the device can measure the ambient temperature and enables remote control of the
air handling unit.
1.3.1 Controls
1. Button not used
2.
Press and hold (2 s) to access the clock
setting menu.
3.
Button to switch on the unit and modify the
ventilation speed.
4. Button to switch off the unit.
5. Encoder:
- Press: confirms the new setpoint value
- Turn: browse between menus and modify the
setpoint
1
2
3
4
5