CIAT FLOWAY - Room Terminal Information, Settings and Browsing

EN-7
EN
1.3.3 Room terminal information, settings and browsing
The diagram below shows the various browsing, information and setting options on the room terminal:
Terminal energising
A few seconds (2-3s)
Terminal initialising
A few seconds (2-3s)
Unit off
Press
Press
Unit on
(default
screen)
Communication fault
with the controller or
terminal presence not
validated in the
controller

pressed and
held
Encoder turned and pressed
Clock
modification
To modify and validate
the temperature
setpoint. Returns to the
default screen after a
few seconds.
Encoder turned
Not used
Encoder turned
Exits the alarm menu when
the encoder is pressed.
u1.3
Cn