To Next Page
A
Anna MonroeAug 19, 2025
What to do if my CIM Printer shows error code 36?
- JJacqueline GallegosSep 12, 2025
If your CIM Printer displays error code 36, it means the ribbon is fully consumed. Replace the ribbon with a new one.
What to do if my CIM Printer shows error code 36?
If your CIM Printer displays error code 36, it means the ribbon is fully consumed. Replace the ribbon with a new one.
Why does my CIM Printer show error code 10?
If your CIM Printer is displaying error code 10, it indicates that the cover opened while printing. Ensure that the cover is closed properly. If the error persists, consider replacing the TPH open checking sensor.
What does error code 14 mean on my CIM Printer?
If your CIM Printer displays error code 14, it indicates a ribbon encoder error, a disconnected ribbon, or that the ribbon has ended. Check the ribbon and ribbon encoder status.
What does error code 15 mean on my CIM Printer?
If your CIM Printer displays error code 15, it means a media error has occurred. Check the card (media) and path sensor status.
What does error code 35 mean on my CIM Printer?
If your CIM Printer displays error code 35, it means the ribbon life is reduced to 10% or less. Prepare to replace the ribbon.
What to do if my CIM Printer shows error code 16?
If your CIM Printer displays error code 16, it indicates an EEPROM read/write error. Reboot or replace the EEPROM.
What does error code 20 mean on my CIM Printer?
If your CIM Printer displays error code 20, it means the command is not compliant with the specifications. Send a compliant command.
What does error code 21 mean on my CIM Printer?
If your CIM Printer displays error code 21, it means the parameter is not valid. Send the parameter command.
What does error code 22 mean on my CIM Printer?
If your CIM Printer displays error code 22, it means the command was not sent on time. Send the command.
What does error code 38 mean on my CIM Printer?
If your CIM Printer displays error code 38, it means the ribbon is not installed properly. Check the ribbon and tag authentication.
Safety warnings that must be followed to avoid serious injury or damage.
Cautions that can cause service interruption or product damage if not followed.
Instructions for loading and cleaning the blue cleaning roller.
Step-by-step guide for loading the printer ribbon.
Instructions for placing cards into the input hopper.
Instructions for loading cards after removing the input hopper.
Lists the minimum and recommended system requirements for installation.
Step-by-step guide for installing the printer software via USB.
Instructions for installing the printer software over a network connection.
Steps to configure network settings for the printer.
Lists errors related to the Thermal Print Head (TPH) and their solutions.
Addresses issues related to card feeding and jams, with removal procedures.
Details errors related to ribbon installation, life, and consumption.
Lists errors related to card input, output, and existence within the printer.
General