CIM SUNLIGHT SATURN - Ribbon Errors; Card Errors; Miscellaneous Errors

14
Ribbon Encoder
Error
Disconnected ribbon,
Ribbon end or
encoder error occurs.
17
IC Module Up/
Down Error
Repair service is required.
IC Content module
position error occurs.
50
[Changer] Module
Response Timeout
Turn off → Remove any cards →
Reboot
Flipper
communication error
occurs.
51
[Changer] Module
Transmission
Timeout
Turn off → Remove any cards →
Reboot
Flipper
communication error
occurs
52
[Changer] Home
Position Failure
Turn off → Remove any cards →
Reboot
An error occurs at the
Flipper home position.
53
[Changer] Card
Flipper Failure
An error occurs at
the Flipper turn up.
54
[Changer] Card
Input Timeout
The printer stops when
the card is entering the
Flipper.
55
[Changer] Card
Input Jam
The card fails to enter
the Flipper on time.
56
[Changer] Card
Output Jam
A card is jammed in the
Flipper.
57
[Changer] Card
Exist
An abnormal card is
found in the Flipper.
15
Media Error Check the card (media) and
path sensor status.
The media error
occurs.
16 EEPROM Error Reboot or replace the EEPROM.
An EEPROM read/
write error occurs.
③ Ribbon
④ Card
⑤ Miscellaneous
Check the Ribbon and Ribbon
encoder status.
Code Code Name Description Solution
Code Code Name Description Solution
Code Code Name Description Solution
Turn off → Remove any cards →
Reboot
Turn off → Remove any cards →
Reboot
Turn off → Remove any cards →
Reboot
Turn off → Remove any cards →
Reboot
Turn off → Remove any cards →
Reboot
81
CIM User Guide Manual