CIM SUNLIGHT SATURN - Change Printer Port (Using the Printer Driver)

88 pages

Save Page as PDF

To Next Page

To Previous Page

3. Select “Ports (or Advanced)” tab in the “Card Printer Properties”.

-Change Printer Port (Using the Printer Driver)

1. Go to “Hardware and Sound → Devices and Printers” in the “Control Panel”.

2. Right-click “Card Printer” and select “Properties (or Printer Properties)”.

Install printer and ready

Main Page

Default Chapter2
- Table of Contents2
Safety Precautions6
Getting Started9
- Product Overview9
- In the Box9
Names of Parts10
- Manual Feeding, Single-Sided Printing10
- Manual Feeding, Double-Sided Printing12
- Auto Feeding, Single-Sided Printing, 1 Input Hopper14
- Auto Feeding, Single-Sided Printing, 2 Input Hoppers16
- Auto Feeding, Double-Sided Printing, 1 Input Hopper18
- Auto Feeding, Double-Sided Printing, 2 Input Hoppers20
Load Blue Cleaning Roller & Ribbon22
- Load Blue Cleaning Roller22
- Load Ribbon23
Load Cards24
- Place Cards in the Input Hopper24
- Place Cards after Removing the Input Hopper25
Print Single Card27
Magnetic Cards28
Input Hopper & Ribbon Lock29
- Input Hopper Lock29
- Ribbon Lock29
Install/Remove Output Stacker30
- Open the Output Stacker Cover and Remove the Cards30
- Use the Spring Load to Remove a Small Quantity of Cards31
- Remove the Output Stacker and the Cards31
Connect Power & Communication Cables32
Install Program33
- System Requirements33
  - ① Supported Operating System33
  - ② Recommended Specifications33
- Install Software33
Uninstall Program49
Print Cards49
- Set as Default Printer49
- Change Printer Port (Using the Printer Driver)50
- Select Input Hopper in the Printer Settings52
- Select Input Hopper 1/2 from External Program54
- (Windows Preview)54
Print Using Application Programs & Configure Driver Settings55
- Print Using Application Programs55
- Configure Printer Default Settings in Application Programs55
Check IP Address & Print Test Card62
- Check IP Address62
- Print Self-Test Card64
  - ① if Connected to a PC64
  - ② if Not Connected to a PC: User Mode65
Maintenance Instructions67
- Supported Cards67
- ① Size67
- ② Thickness67
- ③ Acceptable Cards67
- ④ Unacceptable Cards67
Clean the Printer Clean the Exterior67
- Clean Inside the Printer Using Cleaning Kit68
  - ① Cleaning Kit & Use68
  - ② Clean the Printer Using CR80 Cleaning Card / Long-T Cleaning Card68
- Clean the Blue Cleaning Roller75
Troubleshooting75
- Errors75
- Warning82
- Additional Errors83
Ribbon Specifications83
- Color Ribbons83
- Monochrome Ribbons83
Printer Specifications84
- Product Features84
- Standard Specifications84
- Optional Accessories85
- Printer Specifications85
Warranty Certificate86

CIM SUNLIGHT SATURN - Change Printer Port (Using the Printer Driver)

Table of Contents

Related product manuals