Maintenance Instructions
-Supported Cards
This card printer may not support certain types of PVC cards.
Please use the following PVC cards to prevent any issues and achieve the
highest printing quality.
- International Standard (ISO CR80-ISO7810)
- 53.98mm (W) x 85.60mm (L)/3.375”x2.215”
① Size
- Minimum: 0.4mm
- Standard: 0.76mm
- Maximum: 1.2mm
② Thickness
- Glossy white
- Free of dirt or grease
- Not contaminated
- Free of scratches or dents
- Completely flat
- Static Free
③ Acceptable Cards
- Heavily damaged
- Stained or contaminated
- Scratched
- Bent or deformed
- Embossed
④ Unacceptable Cards
Do not load or use cards considered as
unacceptable as they may damage the
parts including the head, sensor, TPH,
and roller.
Caution
- Clean the printer with a soft, damp cloth. Make sure to unplug the power
adapter before cleaning it.
- Do not allow any liquid to drip inside the printer.
- Make sure that the printer is dry before turning it on.
Do not use any liquid / gel containing a high content of alcohol or solvent to clean
the printer as it may cause discoloration or fissure on its surface.
Caution
Clean the Printer
-Clean the Exterior
67
CIM User Guide Manual
To Next Page
Loading...
