CIM SUNLIGHT SATURN - Use the Spring Load to Remove a Small Quantity of Cards; Remove the Output Stacker and the Cards

-Use the Spring Load to Remove a Small Quantity
of Cards.
- Remove the Output Stacker and the Cards.
Push the Output Stacker
and pull it forward and
then pull it back to remove
it as shown in the picture.
This method is recom-
mended for printing
more than 50 cards,
and up to 60 cards can
be loaded in this way.
31
This method is recommended when printing
fewer than 5 cards.
The Output Stacker is spring loaded so that
it returns to its original position when the
cards are removed.
CIM User Guide Manual