39
Chapter 3 Lookup
Refer to the settings of section 3.8 Action When the Format of Record Is Wrong.
3.2.4 DBF FILE LOCATION
You may specify the location to store the DBF files. The options are as follows:
SRAM
SD Card
3.3 LOOKUP DATA
3.3.1 ONLY READ DATA ONCE
Select the check box to compare data of an input field and the key field of the lookup file
it refers to.
If this function is enabled, Insert to lookup file will be automatically set in section
3.4
Action When the Input Data Has No Match, and you may change it to Show Warning
Message & Insert.
When the data is found matching (i.e. data already exist), this record will be rejected.
When the data is found no matching (i.e. new data), it will be inserted to the lookup
file.
3.3.2 LOOKUP DATA CAN BE UPLOADED
This is the default setting. The lookup data can be uploaded from the mobile computer to
your computer. On the mobile computer, select [2. Upload Data] after you have
completed the data collection task and establish a proper connection with the server.
Refer to section
1.2.3 Record.
3.4 ACTION WHEN THE INPUT DATA HAS NO MATCH
Choose the appropriate action to take when the input data does not match that of the
“
key field”.
3.4.1 CONTINUE
The program will allow data input to proceed without showing any message.
Data can only be saved in a data file if you have selected "Save", "Save & update",
"Save & output record", "Save & output screen" or “Save & remove” in section
1.2.3
Record.
To Next Page
Loading...
Need help?
General
