61
The FORGE Application Generator allows configuring the following reader types,
depending on the module equipped on your mobile computer:
8000 8300 8400 8500
Barcode Reader
1D CCD Scan Engine
1D Laser Scan Engine
1D Long Range Laser Scan Engine (LR)
1D Extra Long Range Laser Scan Engine
(ELR)
2D Scan Engine
RFID Reader
ACG_RFID Module v0.9
ACG_RFID Module v1.0
Options of different reader combination are allowed, such as 1D+RFID and 2D+RFID. For
each combination, both readers can be initialized and ready for scanning at the same
time (dual mode operation). For example, if you press the [Scan] button while running
the AG run-time program on the mobile computer, it will read a barcode in position or an
RFID tag in proximity depending on which one comes first.
Note: You cannot have 1D+2D scan engines installed on the mobile computer because
they are both barcode readers!
SYMBOLOGIES SUPPORTED
Varying by the scan engine installed, the supported symbologies or tag types are listed
below. For details on configuring associated settings, please refer to each Appendix
separately.
CCD, Laser LR, ELR 2D
Codabar
Code 11
Code 93
Composite Code
MSI
Plessey
Appendix I
SCAN ENGINE SETTINGS
To Next Page
Loading...
Need help?
General
