To Next Page

To Previous Page

FORGE Batch Application Generator User Guide

5.1.5 UPLOAD & DOWNLOAD SETTINGS

Settings Default Value Remarks

1. Upload Port Cradle-IR (For 8400,

the default setting is

RS232.)

2. Download Port Cradle-IR

(For 8400,

the default setting is

RS232.)

Bluetooth SPP is not available on the

mobile computer unless selected for

downloading to 8061, 8360.

3. Modem Speed (115200 bps)

4. Baud Rate 115200 bps

5. Backlight Turn off

6. Data Deletion Manual

7. Entry Options Show count Stay on the LCD for 600 ms

8. Key Click Tone 2

9.Barcode Good Read One beep

10. Warning Beep Two beeps

11. Vibrator Duration Off

12. Buzzer Volume LARGE_VOL Only for 8400

UPLOAD METHOD

Select a communication interface used on the mobile computer to upload data file(s) or

lookup file(s) to your computer.

AG - Upload Port

Remarks

AG8000

Normally, the interface options on the mobile computer are

 Cradle-IR

 IrDA

 Modem

 Ethernet Cradle

However, if you download Batch AG runtime to 8061, Bluetooth SPP

must be selected for initial settings, and it will replace Modem

above; otherwise, this option will become unavailable on the mobile

computer –

 [3. Utilities] > [1. Program Settings] > [1. Upload Interface]

 [3. Utilities] > [1. Program Settings] > [2. Download Interface]

CipherLab 8001 User Manual

Other manuals for CipherLab 8001