76
FORGE Batch Application Generator User Guide
SYMBOLOGY SETTINGS TABLE
The symbology settings for the LR/ELR scan engine are all supported on the 2D scan
engine. In addition, the 2D scan engine supports the following symbology settings:
2D
Description Default
Matrix 25 Disable
Verify Check Digit Decide whether to verify the check digit. If the check digit
is incorrect, the barcode will not be accepted.
No
Transmit Check Digit Decide whether to include the check digit
in the data being
transmitted.
No
Select Length
Any Length
One or two fixed lengths
Range (1~55)
Any Length
Chinese 25 Disable
Note: Matrix 25 and Chinese 25 are supported on 2D scan engine for 8400 only.
Code 11 Disable
Verify Check Digit Decide whether to verify the check digit. If the check digit
is incorrect, the barcode will not be accepted.
No verification
One Check Digit
Two Check Digits
No
Transmit Check Digit Decide whether to include the check digit
in the data being
transmitted.
"Verify Check Digit" must be enabled so that the check
digit can be left out (= "Transmit Check Digit"
disabled).
No
Select Length
Any Length
One or two fixed lengths
Range (1~55)
Any Length
Postal Codes ---
US Postnet Enable
US Planet Enable
Transmit US Postal
Check Digit
US Postnet or US Planet must be enabled first! Enable
UK Postal Enable
Transmit UK Postal
Check Digit
UK Postal must be enabled first! Enable
Japan Postal Enable
Australian Postal Enable
Dutch Postal Enable
To Next Page
Loading...
Need help?
General