31
Chapter 1 Form
For example, 4 is selected for decimal places, however, there are only 2 decimal places
in the input number, say "8.12". To follow this rule, the system will save the input data
as "8.1200". If the input number is "8.12345", it will be saved as "8.1234".
1.14.2 BARCODE INPUT
READ PARTIAL BARCODE
By default, it will return the whole barcode that has been decoded. When the check box
is selected, it will return partial barcode according to the settings of the start position and
maximum length.
Below are some examples.
Start position
Max. length Barcode scanned Transaction record
2 10 9876543210 876543210
2 3 9876543210 876
CHECK LEADING CODE
The leading code refers to the digit in the start position of a barcode.
Select the check box to verify the barcode input. When the leading code is not matching,
the barcode will be rejected.
Below are some examples.
Leading code
Barcode scanned Transaction record
9 9876543210 9876543210
2 9876543210 (Error: code not matching)
Read partial code + Check leading code:
Start position
Max. length Leading Code Barcode scanned Transaction record
2 7 8 9876543210 8765432
2 7 9 987654321 (Error)
CHECK DIGIT VERIFICATION
The check digit refers to the digit in the end of a barcode, as a one-digit derived
checksum digit. Select the check box to verify the barcode input. You may apply different
modulus 10 or 11 check digit as provided in the drop-down menu. When the check digit
is not matching, the barcode will be rejected.
To Next Page
Loading...
Need help?
General