Circutor CVM-C10 - NUMBER OF DATA BITS; NUMBER OF STOP BITS

even parity.
odd parity.
To validate the data, press
for 3 seconds and the prog icon will disappear from the display.
Press key
to access the next programming step.
 Number of data bits
The number of data bits of Modbus communications are
programmed on this screen.
Press key
for 3 seconds to edit the bit number selection. The
prog icon will be displayed on the bottom of the screen.
Press key
to browse the two options: 7 or 8 bits.
To validate the data, press
for 3 seconds and the prog icon will disappear from the display.
Press key
to access the next programming step.
 Number of Stop bits
The number of Stop bits of Modbus communications are
programmed on this screen.
Press key
for 3 seconds to edit the Stop bits number
selection. The prog icon will be displayed on the bottom of the
screen.
Press key
to browse the options: 1 or 2 bits.
To validate the data, press
for 3 seconds and the prog icon will disappear from the display.
Press key
to access the next programming step.
68
CVM-C10
Instruction Manual