Cisco 4000 Series User Manual

3-16
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
OL-32185-02
Chapter 3 Install and Connect Cisco 4000 Series ISRs
Install the Router
Warning To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the
handles on modules (such as power supplies, fans, or cards); these types of handles are not designed
to support the weight of the unit. Statement 1032
Caution Be sure to leave some space above and below each router in a rack to allow for cooling air circulation.
After the router is installed, you must connect the chassis to a reliable earth ground. For the chassis
ground connection procedures, see the “Chassis Grounding” section on page 3-19.
Mount Cisco 4200 ISR Chassis in Rack with AC Power Unit
Step 1 Attach the brackets to the router chassis (towards the left or right) as shown in Figure 3-11 and
Figure 3-12.

Cisco 4000 Series Specifications

General

Category	Network Router
Product Type	Router
Form Factor	Rack-mountable
Connectivity Technology	Wired
Product Family	Cisco 4000 Series
Operating System	Cisco IOS XE
Dimensions	Varies by model
Weight	Varies by model
Model	Cisco 4000 Series
WAN Ports	Varies by model
LAN Ports	Varies by model
Storage	Varies by model
Redundancy	Varies by model
Security Features	Varies by model
Network Management	Varies by model
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Network/Transport Protocol	TCP/IP, UDP
Features	Varies by model
Interfaces	Varies by model
Models	Varies
Network Interfaces	Varies by model
Power Supply	Varies by model
Virtualization Support	Yes