Cisco 4000 Series User Manual

3-20
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
OL-32185-02
Chapter 3 Install and Connect Cisco 4000 Series ISRs
Connect Power
Figure 3-13 Chassis Ground Connection on the Router (Cisco 4451-X ISR shown) Chassis
Step 4
Connect the other end of the ground wire to a known reliable earth ground point at your site.
Connect Power
This section explains how to connect AC power to the router.
Warning Read the installation instructions before connecting the system to the power source. Statement 1004
Warning This unit might have more than one power supply connection. All connections must be removed to
de-energize the unit. Statement 1028
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Note The installation must comply with all required electrical codes applicable at the installation site.
250915

Cisco 4000 Series Specifications

General

Category	Network Router
Product Type	Router
Form Factor	Rack-mountable
Connectivity Technology	Wired
Product Family	Cisco 4000 Series
Operating System	Cisco IOS XE
Dimensions	Varies by model
Weight	Varies by model
Model	Cisco 4000 Series
WAN Ports	Varies by model
LAN Ports	Varies by model
Storage	Varies by model
Redundancy	Varies by model
Security Features	Varies by model
Network Management	Varies by model
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Network/Transport Protocol	TCP/IP, UDP
Features	Varies by model
Interfaces	Varies by model
Models	Varies
Network Interfaces	Varies by model
Power Supply	Varies by model
Virtualization Support	Yes