1-15
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Filtering Services
Monitoring Filtering Statistics
Monitoring Filtering Statistics
To monitor filtering statistics, enter one of the following commands:
Examples
The following is sample output from the show url-server command:
hostname# show url-server
url-server (outside) vendor n2h2 host 128.107.254.202 port 4005 timeout 5 protocol TCP
The following is sample output from the show url-server statistics command:
hostname# show url-server statistics
Global Statistics:
--------------------
URLs total/allowed/denied 13/3/10
URLs allowed by cache/server 0/3
URLs denied by cache/server 0/10
HTTPSs total/allowed/denied 138/137/1
HTTPSs allowed by cache/server 0/137
HTTPSs denied by cache/server 0/1
FTPs total/allowed/denied 0/0/0
FTPs allowed by cache/server 0/0
FTPs denied by cache/server 0/0
Requests dropped 0
Server timeouts/retries 0/0
Processed rate average 60s/300s 0/0 requests/second
Denied rate average 60s/300s 0/0 requests/second
Dropped rate average 60s/300s 0/0 requests/second
Server Statistics:
--------------------
10.125.76.20 UP
Vendor websense
Port 15868
Requests total/allowed/denied 151/140/11
Server timeouts/retries 0/0
Responses received 151
Response time average 60s/300s 0/0
URL Packets Sent and Received Stats:
------------------------------------
Message Sent Received
Command Purpose
show url-server Shows information about the URL filtering server.
show url-server statistics Shows URL filtering statistics.
show url-block Shows the number of packets held in the url-block buffer and the number (if any)
dropped because of exceeding the buffer limit or retransmission.
show url-block block statistics Shows the URL block statistics.
show url-cache stats Shows the URL cache statistics.
show perfmon Shows URL filtering performance statistics, along with other performance
statistics.
show filter Shows the filtering configuration.
To Next Page
Loading...
Need help?
General
