Cisco 5510 - ASA SSL / IPsec VPN Edition User Manual

1-20
Cisco ASA Series CLI Configuration Guide
Chapter 1 Completing Interface Configuration (Transparent Mode)
Configuration Examples for Interfaces in Transparent Mode
Configuration Examples for Interfaces in Transparent Mode
The following example includes two bridge groups of three interfaces each, plus a management-only
interface:
interface gigabitethernet 0/0
nameif inside1
security-level 100
bridge-group 1
no shutdown
interface gigabitethernet 0/1
nameif outside1
security-level 0
bridge-group 1
no shutdown
interface gigabitethernet 0/2
nameif dmz1
security-level 50
bridge-group 1
no shutdown
interface bvi 1
ip address 10.1.3.1 255.255.255.0 standby 10.1.3.2
interface gigabitethernet 1/0
nameif inside2
security-level 100
bridge-group 2
no shutdown
interface gigabitethernet 1/1
nameif outside2
security-level 0
bridge-group 2
no shutdown
interface gigabitethernet 1/2
nameif dmz2
security-level 50
bridge-group 2
no shutdown
interface bvi 2
ip address 10.3.5.8 255.255.255.0 standby 10.3.5.9
interface management 0/0
nameif mgmt
security-level 100
ip address 10.2.1.1 255.255.255.0 standby 10.2.1.2
no shutdown

Cisco 5510 - ASA SSL / IPsec VPN Edition Specifications

General

Brand	Cisco
Model	5510 - ASA SSL / IPsec VPN Edition
Category	Firewall
Language	English