1-14
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring the Transparent or Routed Firewall
Firewall Mode Examples
The following is sample output from the show mac-address-table command that shows the table for the
inside interface:
hostname# show mac-address-table inside
interface mac address type Time Left
-----------------------------------------------------------------------
inside 0010.7cbe.6101 static -
inside 0009.7cbe.5101 dynamic 10
Firewall Mode Examples
This section includes examples of how traffic moves through the ASA and includes the following topics:
• How Data Moves Through the ASA in Routed Firewall Mode, page 1-14
• How Data Moves Through the Transparent Firewall, page 1-20
How Data Moves Through the ASA in Routed Firewall Mode
This section describes how data moves through the ASA in routed firewall mode and includes the
following topics:
• An Inside User Visits a Web Server, page 1-15
• An Outside User Visits a Web Server on the DMZ, page 1-16
• An Inside User Visits a Web Server on the DMZ, page 1-17
• An Outside User Attempts to Access an Inside Host, page 1-17
• A DMZ User Attempts to Access an Inside Host, page 1-19
To Next Page
Loading...
Need help?
General
