1-12
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring RIP
Feature History for RIP
Feature History for RIP
Table 1-1 lists each feature change and the platform release in which it was implemented.
Table 1-1 Feature History for RIP
Feature Name Releases Feature Information
RIP support 7.0(1) Support was added for routing data, performing
authentication, and redistributing and monitoring routing
information using the Routing Information Protocol (RIP).
We introduced the route rip command.
Clustering 9.0(1) For RIP, bulk synchronization, route synchronization, and
layer 2 load balancing are supported in the clustering
environment.
We introduced or modified the following commands: show
route cluster, debug route cluster, show mfib cluster,
debug mfib cluster.
To Next Page
Loading...
Need help?
General
