Cisco 5510 - ASA SSL / IPsec VPN Edition User Manual

1-32
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring SNMP
Feature History for SNMP
SNMP traps and
MIBs
8.4(1) Supports the following additional keywords: connection-limit-reached, cpu
threshold rising, entity cpu-temperature, entity fan-failure, entity power-supply,
ikev2 stop | start, interface-threshold, memory-threshold, nat packet-discard,
warmstart.
The entPhysicalTable reports entries for sensors, fans, power supplies, and related
components.
Supports the following additional MIBs: CISCO-ENTITY-SENSOR-EXT-MIB,
CISCO-ENTITY-FRU-CONTROL-MIB, CISCO-PROCESS-MIB,
CISCO-ENHANCED-MEMPOOL-MIB,
CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB, DISMAN-EVENT-MIB,
DISMAN-EXPRESSION-MIB, ENTITY-SENSOR-MIB, NAT-MIB.
Supports the following additional traps: ceSensorExtThresholdNotification,
clrResourceLimitReached, cpmCPURisingThreshold, mteTriggerFired,
natPacketDiscard, warmStart.
We introduced or modified the following commands: snmp cpu threshold rising,
snmp interface threshold, snmp-server enable traps.
IF-MIB ifAlias OID
support
8.2(5)/8.4(2) The ASA now supports the ifAlias OID. When you browse the IF-MIB, the ifAlias
OID will be set to the value that has been set for the interface description.
ASA Services
Module (ASASM)
8.5(1) The ASASM supports all MIBs and traps that are present in 8.4(1), except for the
following:
Unsupported MIBs in 8.5(1):
• CISCO-ENTITY-SENSOR-EXT-MIB (Only objects under the
entPhySensorTable group are supported).
• ENTITY-SENSOR-MIB (Only objects in the entPhySensorTable group are
supported).
• DISMAN-EXPRESSION-MIB (Only objects in the expExpressionTable,
expObjectTable, and expValueTable groups are supported).
Unsupported traps in 8.5(1):
• ceSensorExtThresholdNotification (CISCO-ENTITY-SENSOR-EXT-MIB).
This trap is only used for power supply failure, fan failure, and high CPU
temperature events.
• InterfacesBandwidthUtilization.
SNMP traps 8.6(1) Supports the following additional keywords for the ASA 5512-X, 5515-X, 5525-X,
5545-X, and 5555-X: entity power-supply-presence, entity power-supply-failure,
entity chassis-temperature, entity chassis-fan-failure, entity
power-supply-temperature.
We modified the following command: snmp-server enable traps.
Table 1-7 Feature History for SNMP (continued)
Feature Name
Platform
Releases Feature Information

Cisco 5510 - ASA SSL / IPsec VPN Edition Specifications

General

Brand	Cisco
Model	5510 - ASA SSL / IPsec VPN Edition
Category	Firewall
Language	English