Index
IN-14
Cisco ASA Series CLI Configuration Guide
creating policies 67-11
keepalive setting, tunnel group 70-4
pre-shared key, Easy VPN client on the ASA
5505
74-7
See also ISAKMP
IKEv1
67-19
ILS inspection 48-1
IM 47-19
implementing SNMP 82-16
inbound access lists 41-3
Individual user authentication 74-12
information reply, ICMP message B-15
information request, ICMP message B-15
inheritance
tunnel group
70-1
username attribute 70-91
inside, definition 1-18
inspection_default class-map 35-9
inspection engines
See application inspection
Instant Messaging inspection
47-19
intercept DHCP, configuring 70-57
interface
MTU
12-12, 13-14
interfaces
ASA 5505
enabled status
11-7
MAC addresses 11-4
maximum VLANs 11-2
non-forwarding 11-7
protected switch ports 11-8, 11-10
switch port configuration 11-7
trunk ports 11-9
ASA 5550 throughput 12-7, 13-9
configuring for remote access 72-7
default settings 20-2, 21-2, 22-2, 41-7, 66-6
duplex 10-12, 11-5
enabling 10-25
failover monitoring 7-19
fiber 10-12
IDs 10-24
IP address 12-8, 13-12
MAC addresses
automatically assigning
5-24
manually assigning to interfaces 12-12, 13-14
mapped name 5-21
naming, physical and subinterface 12-8, 13-10, 13-11
redundant 10-26
SFP 10-12
speed 10-12, 11-5
subinterfaces 10-31
turning off 12-18, 13-18
turning on 12-18, 13-18
internal group policy, configuring 70-43
Internet Security Association and Key Management
Protocol
See ISAKMP
IP addresses
classes
B-1
configuring an assignment method for remote access
clients
71-1
configuring for VPNs 71-1
configuring local IP address pools 71-3
interface 12-8, 13-12
management, transparent firewall 13-8
private B-2
subnet mask B-4
IP fragment attack 62-4, 62-7
IP impossible packet attack 62-4, 62-7
IP overlapping fragments attack 62-5
IP phone 74-8
phone proxy provisioning 51-12
IP phone bypass, group policy 70-68
IP phones
addressing requirements for phone proxy
51-9
supported for phone proxy 51-3, 52-2
IPSec
anti-replay window
57-13
To Next Page
Loading...
Need help?
General
