Cisco 5510 - ASA SSL / IPsec VPN Edition User Manual

1-32
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Digital Certificates
Configuring Digital Certificates
Examples
The following example shows the list of local CA files that appear in flash memory or in external storage:
hostname (config-ca-server)# dir LOCAL* //
Directory of disk0:/LOCAL*
75 -rwx 32 13:07:49 Jan 20 2007 LOCAL-CA-SERVER.ser
77 -rwx 229 13:07:49 Jan 20 2007 LOCAL-CA-SERVER.cdb
69 -rwx 0 01:09:28 Jan 20 2007 LOCAL-CA-SERVER.udb
81 -rwx 232 19:09:10 Jan 20 2007 LOCAL-CA-SERVER.crl
72 -rwx 1603 01:09:28 Jan 20 2007 LOCAL-CA-SERVER.p12
127119360 bytes total (79693824 bytes free)
Step 3
crypto ca server
Example:
hostname (config)# crypto ca server
Enters local ca server configuration mode. Allows
you to configure and manage a local CA.
Step 4
database path mount-name directory-path
Example:
hostname (config-ca-server)# database path
mydata:newuser
Specifies the location of mydata, the premounted
CIFS file system to be used for the local CA server
database. Establishes a path to the server and then
specifies the local CA file or folder name to use for
storage and retrieval. To return local CA file storage
to the ASA flash memory, use the no database path
command.
Note To secure stored local CA files on an external
server requires a premounted file system of
file type CIFS or FTP that is
username-protected and password-protected.
Step 5
write memory
Example:
hostname (config)# write memory
Saves the running configuration.
For external local CA file storage, each time that you
save the ASA configuration, user information is
saved from the ASA to the premounted file system
and file location, mydata:newuser.
For flash memory storage, user information is saved
automatically to the default location for the start-up
configuration.
Command Purpose

Cisco 5510 - ASA SSL / IPsec VPN Edition Specifications

General

Brand	Cisco
Model	5510 - ASA SSL / IPsec VPN Edition
Category	Firewall
Language	English