Configure the network profile WLAN settings (SSID, 802.11 mode, Security Mode, WLAN credentials) to match the WLAN
that the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G will utilize.
If planning to use unique 802.1x accounts with the Bulk Export method, the username and password do not need to be
configured, as that will be specified in the CSV file.
By default, DHCP is enabled and is the recommended method, otherwise would need a template per phone if planning to use
static IP addressing.
An alternate TFTP server can be set if the Cisco Unified Communications Manager’s TFTP server IP is not set in option 150 for
the DHCP scope.
To Next Page
Loading...
