Cisco 7925G Deployment Guide

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
58
Out of Range Alert
outOfRangeAlert
0 = Disabled; 1 = Beep Once; <2-4> = Beep every
<10,30,60> seconds
Scan Mode
scanningMode
0 = Auto; 1 = Single AP; 2 = Continuous
Restrict Data Rates
restrictDataRates
0 = Disabled; 1 = Enabled
Power Off When Charging
powerOffWhenCharging
0 = Disabled; 1 = Enabled
Cisco Discover Protocol (CDP)
cdpEnable
0 = Disabled; 1 = Enabled
Advertise G.722 Codec
g722CodecSupport
0 = Use System Default; 1 = Disabled; 2 = Enabled
Home Screen
homeScreen
0 = Main Phone Screen; 1 = Line View
FIPS Mode
fipsMode
0 = Disabled; 1 = Enabled
Auto Line Select
autoSelectLineEnable
0 = Disabled; 1 = Enabled
Bluetooth
bluetooth
0 = Disabled; 1 = Enabled
File System Verification
fileSystemVerificationEnable
0 = Disabled; 1 = Enabled
Minimum Ring Volume
minimumRingVolume
0 = Silent; <1-7> = Different Volume Levels
Bar Code Symbology Group
barCodeSymbologyGroup
0 = Basic; 1 = Extended
Scanner Commands
scannerCommands
(e.g. 414b5a01)
414b5a01enables UPC>EAN13 conversion
4170800005 will turn off the scanner after 5
seconds if no barcode is scanned
Application Button
thumbButton1
PTTH<1-6>
With Cisco Unified Communications Manager Express, the thumbButton1 command can tie the application button to a
specific line.
For example, if line 2 is an intercom line tied to a multicast paging group, then this can be configured to achieve Push To Talk.
Enable individual phone configuration files with the following commands.
telephony-service
cnf-file perphone
create cnf-files
For more information on these features, see the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G
Administration Guide or the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Release Notes.
http://www.cisco.com/en/US/products/hw/phones/ps379/prod_maintenance_guides_list.html
http://www.cisco.com/en/US/products/hw/phones/ps379/prod_release_notes_list.html

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g