EasyManuals Logo

Cisco 7925G Deployment Guide

Cisco 7925G
150 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
57
Note: If configuring the Admin Password in Cisco Unified Communications Manager versions 5.1, 6.0, 6.1, 7.0, 7.1, 8.0, 8.5,
8.6 or later and web access is set to Full, then it is recommended to enable TFTP encryption via the device security profile.
As of the 1.3(3) release, if settings access is set to Disabled, then the current ring volume will be locked in and will no longer
be configurable.
To configure product specific configuration options for the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G
with Cisco Unified Communications Manager Express, create an ephone template with the necessary options.
service phone <module> <value>
Field Name
Module
Value
Disable Speakerphone
disableSpeaker
false = Enabled; true = Disabled
Gratuitous ARP
garp
0 = Enabled; 1 = Disabled
Settings Access
settingsAccess
0 = Disabled; 1 = Enabled; 2 = Restricted
Web Access
webAccess
0 = Full; 1 = Disabled; 2 = ReadOnly
Locked Profiles
WlanProfile<1-4>
0 = Unlocked; 1 = Locked, 2 = Restricted
Load Server
loadServer
x.x.x.x
Admin Password
adminPassword
(e.g. Cisco)
Special Numbers
specialNumbers
(e.g. 411,911)
Application URL
PushToTalkURL
http://x.x.x.x
“Send” Key Action
sendKeyAction
0 = Onhook Dialing; 1 = Offhook Dialing
Phone Book Web Access
phoneBookWebAccess
0 = Deny All; 1 = Allow Admin
Unlock-Settings Sequence
unlockSettingsSequence
0 = Disabled; 1 = Enabled
Application Button Activation
Timer
appButtonTimer
0 = Disabled; <1-5> = <1-5> seconds
Application Button Priority
appButtonPriority
0 = Low; 1 = Medium; 2 = High

Table of Contents

Other manuals for Cisco 7925G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7925G and is the answer not in the manual?

Cisco 7925G Specifications

General IconGeneral
Keypad number of keys12
Display diagonal2 \
Display resolution176 x 220 pixels
Call waitingYes
Lines quantity6 lines
Voice codecsG.711a, G.722, G.729a, iLBC
Security algorithms128-bit WEP, SSL/TLS, WPA
Supported network protocolsDHCP, TFTP, DNS, SCCP, SRST
Input voltage100 - 240 V
Dimensions (WxDxH)52 x 20 x 127 mm
Minimum system requirementsCisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency50/60 Hz
Storage temperature (T-T)-30 - 60 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 95 %
Product typeIP Phone
Product colorGray
SafetyUL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standardsIEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e
Weight and Dimensions IconWeight and Dimensions
Weight138 g

Related product manuals