Cisco 7925G Deployment Guide

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Guide
56
Advertise G.722 Codec
G.722 capabilities can be configured on a phone by phone basis and optionally
override the system default.
Home Screen
By default the Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G
will show the traditional screen with the four icons for directory, services, settings
and line access.
FIPS Mode
The Federal Information Process Standards (FIPS) mode can optionally be enabled.
Auto Line Select
When enabled, indicates that the phone will shift the call focus to incoming calls on
all lines. When disabled, the phone will only shift the focus to incoming calls on
the currently used line.
Bluetooth
Indicates whether the Bluetooth device on the phone is enabled or disabled.
File System Verification
This parameter indicates whether the phone will perform a file system integrity
check as part of the firmware upgrade process. Enable this option to troubleshoot
file system issues. This feature may impact phone performance if it is enabled.
Minimum Ring Volume
This parameter controls the minimum ring volume on the phone. This value is set
by the administrator, and can not be changed by an end user. The end user can
increase the ring volume, but may not decrease the ring volume below the level
defined. The minimum ring volume range is from 0 to 7, with 0 (silent) being the
default value.
7926G Specific Configuration Options
Field Name
Description
Bar Code Symbology Group
This parameter specifies the symbology the scanner will use to scan bar codes.
Select Basic or Extended symbology.
Scanner Commands
Use this field to customize the scanner features. Use comma to separate multiple
commands. Please refer to the Midlet Developer Guide for additional information.
Below shows the main phone screen (left) and line view (right) display options for the home screen.

Cisco 7925G Specifications

General

Keypad number of keys	12
Display diagonal	2 \
Display resolution	176 x 220 pixels
Call waiting	Yes
Lines quantity	6 lines
Voice codecs	G.711a, G.722, G.729a, iLBC
Security algorithms	128-bit WEP, SSL/TLS, WPA
Supported network protocols	DHCP, TFTP, DNS, SCCP, SRST
Input voltage	100 - 240 V
Dimensions (WxDxH)	52 x 20 x 127 mm
Minimum system requirements	Cisco Unified Communications Manager 4.1, 4.2, 4.3, 5.1, 6.0, 6.1, 7.0 + Cisco Unified Communications Manager Express 4.3 +
Input frequency	50/60 Hz
Storage temperature (T-T)	-30 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 95 %
Product type	IP Phone
Product color	Gray
Safety	UL 60950, CSA 22.2 No.60950, EN 60950, IEC 60950, AS/NZS 60950, IEC 60529 (IP 54)
Certification	47 CFR 15 B ICES-003 B EN 55022 B AS/NZS CISPR 22 B CISPR 22 B VCCI B EN 61000-3-2 EN 61000-3-3 KN 22 EN 55024 EN 50082-1 EN 61000-6-1 EN 300386 EN 60601-1-2 KN
Compliance industry standards	IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.1X, IEEE 802.11e

Weight and Dimensions

Weight	138 g