Cisco A9K-SIP-700 Routing Configuration Guide

PurposeCommand or Action
(Optional) Sets the keepalive timer and the hold-time timer
for the BGP neighbor.
timers keepalive hold-time
Example:
RP/0/RSP0/CPU0:router(config-bgp-nbr)# timers
60 220
Step 5
commit
Step 6
Changing the BGP Default Local Preference Value
Perform this task to set the default local preference value for BGP paths.
SUMMARY STEPS
1.
configure
2.
router bgp as-number
3.
bgp default local-preference value
4.
commit
DETAILED STEPS
PurposeCommand or Action
configure
Step 1
Specifies the autonomous system number and enters the BGP
configuration mode, allowing you to configure the BGP
routing process.
router bgp as-number
Example:
RP/0/RSP0/CPU0:router(config)# router bgp
120
Step 2
Sets the default local preference value from the default of
100, making it either a more preferable path (over 100) or
less preferable path (under 100).
bgp default local-preference value
Example:
RP/0/RSP0/CPU0:router(config-bgp)# bgp
default local-preference 200
Step 3
commit
Step 4
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
85
Implementing BGP
Changing the BGP Default Local Preference Value

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English