Cisco A9K-SIP-700 Routing Configuration Guide

Enters global configuration mode.
Step 2
router bgpas-number
Example:
RP/0/RSP0/CPU0:router(config)# router bgp 666
RP/0/RSP0/CPU0:router(config-bgp)#
Specifies the autonomous system number and enters the BGP configuration mode, allowing you to configure the BGP
routing process.
Step 3
vrfvrf-instance
Example:
RP/0/RSP0/CPU0:router(config-bgp)# vrf vrf-pe
RP/0/RSP0/CPU0:router(config-bgp-vrf)#
Configures a VRF instance.
Step 4
address-family {ipv4 | ipv6} unicast
Example:
RP/0/RSP0/CPU0:router(config-bgp-vrf)# address-family ipv4 unicast
RP/0/RSP0/CPU0:router(config-bgp-vrf-af)#
Specifies either an IPv4 or IPv6 address family unicast and enters address family configuration submode.
Step 5
label mode per-ce
Example:
RP/0/RSP0/CPU0:router(config-bgp-vrf-af)# label mode per-ce
RP/0/RSP0/CPU0:router(config-bgp-vrf-af)#
Configures resilient per-ce label allocation mode.
Step 6
Do one of the following:
•
end
•
commit
Example:
RP/0/RSP0/CPU0:router(config-bgp-vrf-af)# end
or
RP/0/RSP0/CPU0:router(config-bgp-vrf-af)# commit
Saves configuration changes.
•
When you issue the end command, the system prompts you to commit changes:
Uncommitted changes found, commit them before exiting(yes/no/cancel)?[cancel]:
◦
Entering yes saves configuration changes to the running configuration file, exits the configuration session,
and returns the router to EXEC mode.
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
182
Implementing BGP
Configuring Resilient Per-CE Label Allocation Mode

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English