PurposeCommand or Action
(Optional) Displays OSPF interface information.
show { ospf | ospfv3 } [ process-name ] [ vrf vrf-name ] [ area-id
] interface [ type interface-path-id ]
Step 5
Example:
RP/0/RSP0/CPU0:router# show ospf 100 interface
GigabitEthernet 0/3/0/0
(Optional) Displays OSPF neighbor information
on an individual interface basis.
show { ospf | ospfv3 }[ process-name ] [ area-id ] neighbor [ t
ype interface- path-id ] [ neighbor-id ] [ detail ]
Example:
RP/0/RSP0/CPU0:router# show ospf 100 neighbor
Step 6
(Optional) Resets an OSPF router process without
stopping and restarting it.
clear { ospf | ospfv3 }[ process-name ] process
Example:
RP/0/RSP0
/CPU0:router# clear ospf 100 process
Step 7
Clears OSPF route redistribution.
clear{ospf|ospfv3[ process-name ] redistribution
Example:
RP/0/RSP0/CPU0:router#clear ospf 100 redistribution
Step 8
Clears OSPF route table.
clear{ospf|ospfv3[ process-name ] routes
Example:
RP/0/RSP0/CPU0:router#clear ospf 100 routes
Step 9
Clears OSPF route table.
clear{ospf|ospfv3[ process-name ] vrf [vrf-name|all] {process
|redistribution|routes|statistics [interface type
interface-path-id|message-queue|neighbor]}
Step 10
Example:
RP/0/RSP0/CPU0:router#clear ospf 100 vrf vrf_1 process
(Optional) Clears the OSPF statistics of neighbor
state transitions.
clear { ospf | ospfv3 }[ process-name ] statistics [ neighbor [
type interface-path-id ] [ ip-address ]]
Example:
RP/0/RSP0/CPU0:router# clear ospf 100 statistics
Step 11
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
487
Implementing OSPF
Verifying OSPF Configuration and Operation
To Next Page
Loading...
Need help?
General
