EasyManuals Logo

Cisco A9K-SIP-700 Routing Configuration Guide

Cisco A9K-SIP-700
702 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #656 background imageLoading...
Page #656 background image
pass else drop endif
RP/0/RSP0/CPU0:router(config-rpl)# end-policy
This route policy configuration accepts routes with extended community set values as mentioned in the
two extended community sets, and drops all other non-matching routes.
3
Commit your configuration.
RP/0/RSP0/CPU0:router(config)# commit
This completes the configuration of routing policy with wildcards for extended community sets. For detailed
information on extended community path sets, see extcommunity-set, on page 547.
Use Wildcards for Route Distinguisher Sets
Use the following example to configure a routing policy with wildcards for route distinguisher sets.
1
Configure the route distinguisher sets in the global configuration mode.
RP/0/RSP0/CPU0:router(config)# rd-set rd_set_demo
RP/0/RSP0/CPU0:router(config-rd)# 10.0.0.1/8:77,
RP/0/RSP0/CPU0:router(config-rd)# 10.0.0.2:888,
RP/0/RSP0/CPU0:router(config-rd)# 65000:777
RP/0/RSP0/CPU0:router(config-rd)# end-set
RP/0/RSP0/CPU0:router(config)# rd-set rd_set_demo2
RP/0/RSP0/CPU0:router(config-rd)# 20.0.0.1/7:99,
RP/0/RSP0/CPU0:router(config-rd)# 4784:199
RP/0/RSP0/CPU0:router(config-rd)# end-set
2
Configure a route policy with wildcards to refer to the route distinguisher set.
RP/0/RSP0/CPU0:router(config)# route-policy use_rd_set
RP/0/RSP0/CPU0:router(config-rpl)# if rd in rd-set* then set local-preference 100
RP/0/RSP0/CPU0:router(config-rpl-if)# elseif rd in(10.0.0.2:888, 10.0.0.2:999)then set
local-preference 300
RP/0/RSP0/CPU0:router(config-rpl-elseif)# endif
RP/0/RSP0/CPU0:router(config-rpl)# end-policy
3
Commit your configuration.
RP/0/RSP0/CPU0:router(config)# commit
4
(Optional) Verify your configuration.
RP/0/RSP0/CPU0:router(config)# show configuration
...
Building configuration...
!! IOS XR Configuration 0.0.0
!
rd-set rd_set_demo
10.0.0.1/8:77,
10.0.0.2:888,
65000:777
end-set
!
!
rd-set rd_set_demo2
20.0.0.1/7:99,
4784:199
end-set
!
route-policy use_rd_set
if rd in rd-set* then
set local-preference 100
elseif rd in (10.0.0.2:888, 10.0.0.2:999) then
set local-preference 300
endif
end-policy
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.3.x
626
Implementing Routing Policy
Use Wildcards For Routing Policy Sets

Table of Contents

Other manuals for Cisco A9K-SIP-700

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco A9K-SIP-700 and is the answer not in the manual?

Cisco A9K-SIP-700 Specifications

General IconGeneral
BrandCisco
ModelA9K-SIP-700
CategoryNetwork Router
LanguageEnglish

Related product manuals