Cisco ASR 1001-X User Manual

NAME: "SPA subslot 0/0", DESCR: "8-port Built-in GE SPA"
PID: BUILT-IN-2T+6X1GE , VID: , SN:
NAME: "module R0", DESCR: "Cisco ASR1001-X Route Processor"
PID: ASR1001-X , VID: V00, SN: JAE1719030S
NAME: "module F0", DESCR: "Cisco ASR1001-X Embedded Services Processor"
PID: ASR1001-X , VID: , SN:
Router#
Step 9
Use the dir hardisk: command to verify whether the total file size of the hard disk partitions are correct. For example:
Example:
Router# dir harddisk:
Directory of harddisk:
11 drwx 16384 Jul 16 2014 11:30:24 -03:00 lost+found
787616940032 bytes total (747608293376 bytes free)
Router#
You have completed the NIM-SSD replacement procedure.
Repacking the Router
If your system is damaged, you must repack it for return shipment.
Before you return the router or move the router to a different location, repack the system using the original
packaging material.
Cisco ASR 1001-X Router Hardware Installation Guide
118
Removing and Replacing FRUs from the Cisco ASR 1001-X Router
Repacking the Router

Cisco ASR 1001-X Specifications

General

Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Networking standards	-
Ethernet LAN (RJ-45) ports	6
Installed SFP modules quantity	2
Flash memory	1024 MB
Internal memory	8192 MB
Processor cores	4
AC input voltage	85 - 264 V
Power source type	AC
Power consumption (typical)	250 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Security algorithms	AES

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	10590 g