Cisco ASR 1001-X - Cisco ASR 1006 Router Memory and Storage Options; Cisco ASR 1006 Router Ethernet RJ-45 Port Pinouts

SpecificationDescription
•
Fully loaded chassis: 109.1 pounds (49.5 kg)
•
Only chassis: 25 pounds (11.33kg)
Using the Cisco ASR1000-ESP100 instead of the Cisco
ASR1000-ESP40 adds 2.1 lbs to the total weight of the
router.
Note
Weight
•
41° to 104° F
•
5° to 40° C
Nominal operating temperature
10% to 85%Nominal operating humidity
• –38° to 150° F
• –40° to 70° C
Storage temperature
•
Maximum DC: 1700W
•
Maximum AC: 1600W
•
Maximum (Out): 1275W
Power consumption
Cisco ASR 1006 Router Memory and Storage Options
Table 25: Memory and Storage Options for Cisco ASR 1006 Router
Maximum System SupportDefaultMemory Type
4 GBDRAM2 GB DRAMRP1
Hard disk drive 40 GB for code storage or
solid-state drive 32 GB support
1 GB (Partitioned: 2x32MB for NVRAM
and the remaining for mass storage
eUSB
Cisco ASR 1006 Router Ethernet RJ-45 Port Pinouts
The Cisco ASR 1006 Router has an RJ-45 port for the 10/100/1000 Ethernet connection. The RJ-45 port
supports IEEE 802.3ab (Gigabit Ethernet) and IEEE 802.3u (Fast Ethernet) interfaces compliant with 10BASET,
100BASETX, and 1000BASET specifications.
The RJ-45 port supports standard straight-through and crossover Category 5 UTP cables with RJ-45 connectors.
Cisco does not supply Category 5 UTP cables; these cables are available commercially.
Cisco ASR 1001-X Router Hardware Installation Guide
120
Cisco ASR 1001-X Router Specifications
Cisco ASR 1006 Router Memory and Storage Options