Cisco ASR 1001-X User Manual

Step 3
Press Return to bring up the Router> prompt.
Step 4
Type enable to enter privileged EXEC mode:
Example:
Router> enable
Router#
Configuring the Router Hostname
The hostname is used in CLI prompts and default configuration filenames. If you do not configure the router
hostname, the router uses the factory-assigned default hostname Router.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
hostname name
4.
end
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Router> enable
Enter your password if prompted.
Enters global configuration mode.configure terminal
Example:
Router# configure terminal
Step 2
Specifies or modifies the hostname for the network server.
hostname name
Example:
Router(config)# hostname myrouter
Step 3
(Optional) Returns to privileged EXEC mode.end
Example:
myrouter# end
Step 4
Cisco ASR 1001-X Router Hardware Installation Guide
55
Cisco ASR 1001-X Router Power Up and Initial Configuration
Using the Cisco IOS-XE CLI--Manual Configuration

Cisco ASR 1001-X Specifications

General

Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Networking standards	-
Ethernet LAN (RJ-45) ports	6
Installed SFP modules quantity	2
Flash memory	1024 MB
Internal memory	8192 MB
Processor cores	4
AC input voltage	85 - 264 V
Power source type	AC
Power consumption (typical)	250 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Security algorithms	AES

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	10590 g