Cisco ASR 1001-X - 10-GE Interface Evaluation License Features

Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 1 day
Period used: 2 days 8 hours
Lock type: Non Node locked
Vendor info: <UDI><PID>NOTLOCKED</PID><SN>NOTLOCKED</SN></UDI><T>RTU</T>
License Addition: Additive
License Generation version: 0x8200000
License Count: 0/0 (In-use/Violation)
License Priority: Low
StoreIndex: 13 Feature: interface_10g Version: 1.0
License Type: EvalRightToUse
License State: Active, In Use
Evaluation total period: 8 weeks 4 days
Evaluation period left: 2 weeks 6 days
Period used: 5 weeks 4 days
Transition date: Jun 09 2014 05:14:47
Lock type: Non Node locked
Vendor info: <UDI><PID>NOTLOCKED</PID><SN>NOTLOCKED</SN></UDI><T>RTU</T>
License Addition: Additive
License Generation version: 0x8200000
License Count: 2/0 (In-use/Violation)
License Priority: Low
Table 22: show license all Command Output Description
DescriptionField Name
No 10-GE ports in use for the evaluation license.License Count: 0/0 (In-use/Violation)
Two 10-GE ports in use for the evaluation license (a
EULA was accepted for each prior to use).
License Count: 2/0 (In-use/Violation)
10-GE Interface Evaluation License Features
The following are the features of the 10-GE Interface Evaluation license:
•
There is only one 60-Day Evaluation Period countdown timer for both 10-GE ports. The timer is initiated
as soon as the first of the two ports is enabled.
•
A EULA will be presented, and must be accepted, the first time you enable either of the two ports in
order to utilize the requested port.
Cisco ASR 1001-X Router Hardware Installation Guide
88
Cisco ASR 1001-X Router License Verification
10-GE Interface Evaluation License Features