Cisco ASR 1001-X User Manual

Cisco ASR 1006 Router Auxiliary Port Signals and Pinouts
Table 30: Auxiliary Port Pinouts for Cisco ASR 1006 Router
DescriptionDirectionSignalPin
Request to SendOutRTS1
Data Terminal Ready
(always On)
OutDTR2
Transmit DataOutTXD3
Ring Indicator
—
RI4
——
GND5
Receive DataInRXD6
Data Set Ready/Data
Carrier Detect
InDSR/DCD7
Clear to SendInCTS8
Cisco ASR 1006 Router DB-25 Pinout Assignments for Alarm Relays
The alarm ports for the Cisco ASR 1006 Router (Cisco ASR 1004 Router and Cisco ASR 1013 Router) power
supplies reside on the DB-25 connector on the face of the power supply. The alarm ports are relay contact
closures that the IOS environmental software controls. The environmental monitoring functions of the system
can include voltage and temperature monitoring for the router installed components and failure sensing for
power supply fan tray.
Any alarms that light the front panel LEDs on the Cisco ASR1000-RP1 causes a contact closure between the
corresponding pins within the DB-25 alarm port of both power supplies. In the DB-25 connector, each alarm
consists of a three-pin set containing a common pin, a normally open pin, and a normally closed pin. The
connections that describe alarm activity are Alarm off (Common is connected to normally closed and normally
open is disconnected) and Alarm on (Common is connected to normally open and normally closed is
disconnected).
The following table lists the common, normally open, and normally closed relay contacts accessible to an
external alarm monitoring facility by means of the DB-25 connector.
Cisco ASR 1001-X Router Hardware Installation Guide
123
Cisco ASR 1001-X Router Specifications
Cisco ASR 1006 Router Auxiliary Port Signals and Pinouts

Cisco ASR 1001-X Specifications

General

Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Networking standards	-
Ethernet LAN (RJ-45) ports	6
Installed SFP modules quantity	2
Flash memory	1024 MB
Internal memory	8192 MB
Processor cores	4
AC input voltage	85 - 264 V
Power source type	AC
Power consumption (typical)	250 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Security algorithms	AES

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	10590 g