Cisco ASR 1001-X - Per Port Counted License (10-GE Interfaces)

License Type: EvalRightToUse
License State: Inactive
Evaluation total period: 8 weeks 4 days
Evaluation period left: 8 weeks 1 day
Period used: 2 days 8 hours
Lock type: Non Node locked
Vendor info: <UDI><PID>NOTLOCKED</PID><SN>NOTLOCKED</SN></UDI><T>RTU</T>
License Addition: Additive
License Generation version: 0x8200000
License Count: 0/0 (In-use/Violation)
License Priority: Low
router#
Table 21: show license all Command Output Description
DescriptionField Name
Primary license storage.License Store: Primary License Storage
Built-in license storage.License Store: Built-In License Storage
Per Port Counted License (10-GE Interfaces)
The 10-GE interfaces on the Cisco ASR 1001-X Router use a per port counted license, which has the following
features:
•
Count-based licenses will be used for 10-GE ports, 1 count per port.
•
An End-User License Agreement (EULA) will be displayed for each port if there is no permanent license
present to support these ports.
•
The image carries 2-count 10-GE port EvalRTU (Evaluation) licenses. If the EvalRTU license expires,
it becomes a Right-To-Use (RTU) license.
•
The no shut command on a 10-GE interface requests one count of the license, and the In-use count
increases by 1.
•
The shut command on a 10-GE interface releases one count of the license, and the In-use count decreases
by 1.
The following EvalRTU license example displays the EvalRTU licenses used on the 10-GE ports. A Permanent
license would work similarly:
StoreIndex: 13 Feature: interface_10g Version: 1.0
License Type: EvalRightToUse
License State: Inactive
Cisco ASR 1001-X Router Hardware Installation Guide
87
Cisco ASR 1001-X Router License Verification
Per Port Counted License (10-GE Interfaces)