Cisco ASR 1001-X User Manual

DateVerified ByTask
Network interface cables and
devices connected
System power turned on
System boot complete (STATUS
LED is on)
Shared port adapters and NIMs
(where applicable) are operational
Correct hardware configuration
displayed after system banner
appears
Correct licenses installed on the
router
Cisco ASR 1001-X Router Hardware Installation Guide
45
Preparing Your Site for Installation
Cisco ASR 1001-X Router Installation Checklist

Cisco ASR 1001-X Specifications

General

Product color	Gray
Rack capacity	1U
Rack mounting	Yes
Networking standards	-
Ethernet LAN (RJ-45) ports	6
Installed SFP modules quantity	2
Flash memory	1024 MB
Internal memory	8192 MB
Processor cores	4
AC input voltage	85 - 264 V
Power source type	AC
Power consumption (typical)	250 W
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 90 %
Security algorithms	AES

Weight and Dimensions

Depth	461.5 mm
Width	439.42 mm
Height	43.43 mm
Weight	10590 g