Cisco Catalyst 2960-X - Configuring Coa on the Switch

PurposeCommand or Action
Returns to privileged EXEC mode.end
Example:
Switch(config)# end
Step 5
Verifies your entries.show running-config
Example:
Switch# show running-config
Step 6
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Switch# copy running-config
Step 7
startup-config
Related Topics
Vendor-Proprietary RADIUS Server Communication, on page 83
Configuring CoA on the Switch
Follow these steps to configure CoA on a switch. This procedure is required.
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
98 OL-29048-01
Configuring RADIUS
Configuring CoA on the Switch