Cisco Catalyst 2960-X - Monitoring Port Blocking; Where to Go Next; Additional References

PurposeCommand or Action
Verifies your entries.show running-config
Example:
Switch# show running-config
Step 8
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Switch# copy running-config startup-config
Step 9
Monitoring Port Blocking
Table 33: Commands for Displaying Port Blocking Settings
PurposeCommand
Displays the administrative and operational status of all
switching (nonrouting) ports or the specified port, including
port blocking and port protection settings.
show interfaces [interface-id] switchport
Where to Go Next
•
Additional References
Related Documents
Document TitleRelated Topic
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
404 OL-29048-01
Configuring Port-Based Traffic Control
Monitoring Port Blocking