EasyManua.ls Logo

Cisco Catalyst 2960-X - Creating a VLAN Map

Cisco Catalyst 2960-X
498 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PurposeCommand or Action
action { forward}
Switch(config-access-map)# action
forward
action { drop}
Switch(config-access-map)# action
drop
Applies the VLAN map to one or more VLAN IDs.
vlan filter mapname vlan-list list
Step 4
Example:
Switch(config)# vlan filter map 1
The list can be a single VLAN ID (22), a consecutive list (10-22), or a string
of VLAN IDs (12, 22, 30). Spaces around the comma and hyphen are
optional.
vlan-list 20-22
Related Topics
Creating a Numbered Standard ACL, on page 154
Creating a Numbered Extended ACL, on page 156
Creating Named MAC Extended ACLs, on page 168
Creating a VLAN Map, on page 174
Applying a VLAN Map to a VLAN, on page 176
Creating a VLAN Map
Each VLAN map consists of an ordered series of entries. Beginning in privileged EXEC mode, follow these
steps to create, add to, or delete a VLAN map entry:
SUMMARY STEPS
1.
configure terminal
2.
vlan access-map name [number]
3.
match {ip | mac} address {name | number} [name | number]
4.
action {drop | forward}
5.
end
6.
show running-config
7.
copy running-config startup-config
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
174 OL-29048-01
Configuring IPv4 ACLs
Creating a VLAN Map

Table of Contents

Other manuals for Cisco Catalyst 2960-X

Related product manuals