Cisco Catalyst 2960-X - Feature Information for Web-Based Authentication

PurposeCommand
Displays the web-based authentication settings for
the specified interface for fastethernet, gigabitethernet,
or tengigabitethernet.
In Session Aware Networking mode, use the show
access-session interface command.
show authentication sessions interface
type slot/port[details]
Feature Information for Web-Based Authentication
Feature InformationRelease
This feature is introduced.Cisco IOS 15.0(2)EX
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
388 OL-29048-01
Configuring Web-Based Authentication
Feature Information for Web-Based Authentication