EasyManua.ls Logo

Cisco Catalyst 2960-X - Configuring Limiting Login for Users

Cisco Catalyst 2960-X
498 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PurposeCommand or Action
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Switch# copy running-config startup-config
Step 9
Configuring Limiting Login for Users
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
aaa new-model
4.
aaa authentication login default local
5.
aaa authentication rejected n in m ban x
6.
end
7.
show aaa local user blocked
8.
clear aaa local user blocked username username
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Example:
Device> enable
Step 1
Enter your password if prompted.
Enters global configuration mode.configure terminal
Example:
Device# configure terminal
Step 2
Enables the authentication, authorization, and accounting (AAA)
access control model.
aaa new-model
Example:
Device(config)# aaa new-model
Step 3
Sets the authentication, authorization, and accounting (AAA)
authentication by using the default authentication methods.
aaa authentication login default local
Example:
Device(config)# aaa authentication login
default local
Step 4
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
OL-29048-01 339
Configuring IEEE 802.1x Port-Based Authentication
Configuring Limiting Login for Users

Table of Contents

Other manuals for Cisco Catalyst 2960-X

Related product manuals