Cisco Catalyst 2960-X - Configuring AAA Authentication

PurposeCommand or Action
Returns to configuration mode.exit
Example:
Switch(config-if)# exit
Step 6
Enables the IP device tracking table.ip device tracking
Example:
Switch(config)# ip device tracking
Step 7
Returns to privileged EXEC mode.end
Example:
Switch(config)# end
Step 8
Displays the configuration.show ip admission status
Example:
Switch# show ip admission status
Step 9
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Switch# copy running-config startup-config
Step 10
Configuring AAA Authentication
Follow these steps to configure AAA authentication:
Use default list for AAA authorization, if you are planning to use features such as dACL.Note
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
OL-29048-01 373
Configuring Web-Based Authentication
Configuring AAA Authentication