Feature InformationRelease
The IP Access List Entry Sequence Numbering
feature helps users to apply sequence numbers to
permit or deny statements and also reorder, add, or
remove such statements from a named IP access list.
This feature makes revising IP access lists much
easier. Prior to this feature, users could add access
list entries to the end of an access list only; therefore
needing to add statements anywhere except the end
required reconfiguring the access list entirely.
The following commands were introduced or
modified: deny (IP), ip access-list resequence deny
(IP), permit (IP).
Cisco IOS 15.2(2)E
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
196 OL-29048-01
Configuring IPv4 ACLs
Feature Information for IPv4 Access Control Lists
To Next Page
Loading...
