•
The switch supports up to 16 simultaneous Telnet sessions. Changes made by one Telnet user are
reflected in all other Telnet sessions.
•
The switch supports up to five simultaneous secure SSH sessions.
After you connect through the console port, through the Ethernet management port, through a Telnet
session or through an SSH session, the user EXEC prompt appears on the management station.
Catalyst 2960-X Switch Security Configuration Guide, Cisco IOS Release 15.0(2)EX
12 OL-29048-01
Using the Command-Line Interface
Accessing the CLI Through a Console Connection or Through Telnet
To Next Page
Loading...
