Cisco Catalyst 2960-XR

IP multicast routing (continued)
RP 57, 64, 70
configuring PIMv2 BSR 57
monitoring mapping information 70
using Auto-RP and BSR 64
M
MBONE 100
monitoring 70, 89, 102
IP multicast routing 102
RP mapping information 70
SSM mapping 89
multicast forwarding 42
P
PIM 37, 39, 43, 45, 66, 68, 69, 70, 97
default configuration 45
dense mode 43
RPF lookups 43
enabling a mode 97
monitoring 69
router-query message interval, modifying 68
shortest path tree, delaying the use of 66
sparse mode 39, 43
join messages and shared tree 39
prune messages 39
RPF lookups 43
versions 37, 70
interoperability 37
troubleshooting interoperability problems 70
v2 improvements 37
PIM DM 38
PIM domain border 58
PIM shared tree 44
PIM source tree 44
PIM stub routing 35, 39, 45
prerequisites 29, 77
CGMP 29
SSM 77
R
rendezvous point 47
restrictions 30, 78
CGMP 30
SSM 78
reverse path check 42
RP 48, 52
sparse-mode cloud 52
RP announcement messages 55
RPs 63
candidate 63
S
sdr 100
SSM 79, 82, 89
differs from Internet standard multicast 79
IGMPv3 79
monitoring 89
PIM 79
SSM mapping 81, 83, 84, 85, 87, 89
DNS-based 81, 85
monitoring 89
static traffic forwarding 87
SSM Mapping 81
SSM operations 80
static SSM mapping 81
T
troubleshooting 70
PIMv1 and PIMv2 interoperability problems 70
Catalyst 2960-XR Switch IP Multicast Routing Configuration Guide, Cisco IOS Release 15.0(2)EX1
IN-2 OL-29426-01
Index