1-5
Catalyst 2960 Switch Hardware Installation Guide
OL-7075-09
Chapter 1 Product Overview
Front Panel Description
both at the same time. Use the software to set the connector type for these ports. For more information
about the dual-purpose port, see the “Dual-Purpose Port” section on page 1-13. See Figure 1-2 and
Figure 1-3.
Figure 1-2 Catalyst 2960-24TC-S Switch Front Panel
Figure 1-3 Catalyst 2960-48TC-S Switch Front Panel
The 10/100 ports on the Catalyst 2960-48TT-S switch are numbered as follows: The first member of the
pair (port 1) is above the second member (port 2), port 3 is above port 4, and so on. This switch has two
10/100/1000 uplink ports, numbered 1 and 2. The See Figure 1-4.
Figure 1-4 Catalyst 2960-48TT-S Switch Front Panel
1 10/100 ports 2 Dual-purpose ports
Catalyst 2960
Series SI
SYST
STAT
DUPLX
SPEED
MODE
204631
2
1
1 10/100 ports 2 Dual-purpose ports
Catalyst 2960
Series SI
SYST
STAT
DUPLX
SPEED
MODE
1 2
204630
65 87 109 1211 21 43
1817 2019 2221 1413 1615
3029 3231 3433 3635 2625 2827
4241 4443 4645 4847 3837 4039
2423
1 10/100 ports 2 10/100/1000 ports
Catalyst 2960 Series SI
271431
1
2
To Next Page
Loading...
