EasyManua.ls Logo

Cisco CATALYST 2960 - Chapter 2 Using the Command-Line Interface; Searching and Filtering Output of show and more Commands; Accessing the CLI; You manage the switch stack and the stack member interfaces through the stack master. You cannot manage stack members on an individual switch basis. You can connect to the stack master through the console port of one or more stack members. Be careful with using multiple CLI sessions to the stack master. Commands that you enter in one session are not displayed in the other sessions. Therefore, it is possible to lose track of the session from which you entered commands.

Cisco CATALYST 2960
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A-3
Catalyst 2960 Switch Hardware Installation Guide
OL-7075-09
Appendix A Technical Specifications
Table A-4 Catalyst 2960-24TC-L and Catalyst 2960-24TT-L Switch Specifications
Power Requirements
AC input voltage
DC input voltage for RPS 2300
DC input voltage for RPS 675
Power consumption
Power rating
100 to 240 VAC (autoranging)
1.3 to 0.8 A, 50 to 60 Hz
+12 V @5 A
+12 V @5 A
30 W, 103 BTUs per hour
0.05 KVA
Physical Dimensions
Weight
Dimensions (H x D x W)
8 lb (3.63 kg)
1.73 x 9.3 x 17.5 in. (4.39 x 23.62 x 44.45 cm)
Table A-5 Catalyst 2960-48TC-L, 2960-48TT-S, and 2960-48TT-L Switch Specifications
Power Requirements
AC input voltage
DC input voltage for RPS 2300
DC input voltage for RPS 675
Power consumption
Power rating
100 to 240 VAC (autoranging)
1.3 to 0.8 A, 50 to 60 Hz
+12 V @5 A
+12 V @5 A
45 W, 154 BTUs per hour
0.075 KVA
Physical Dimensions
Weight
Dimensions (H x D x W)
8 lb (3.63 kg)
1.73 x 9.3 x 17.5 in. (4.39 x 23.62 x 44.45 cm)
Table A-6 Catalyst 2960G-24TC-L and Catalyst 2960G-48TC-L Switch Specifications
Power Requirements
AC input voltage
DC input voltage for RPS 2300
DC input voltage for RPS 675
Power consumption
Power rating
100 to 240 VAC (autoranging)
3 to 1.5 A, 50 to 60 Hz
+12 V @10.5 A
+12 V 10.5 A
75 W, 256 BTUs per hour (Catalyst 2960G-24TC-L)
140 W, 477 BTUs per hour (Catalyst 2960G-48TC-L)
0.075 KVA (Catalyst 2960G-24TC-L
0.14 KVA (Catalyst 2960G-48TC-L
Physical Dimensions
Weight
Dimensions (H x D x W)
10 lb (4.54 kg) (Catalyst 2960G-24T-L)
12 lb (5.44 kg) (Catalyst 2960G-48TC-L
1.73 x 12.9 x 17.5 in. (4.39 x 32.76 x 44.45 cm)

Table of Contents

Other manuals for Cisco CATALYST 2960

Related product manuals