Cisco CATALYST 2960 Hardware Installation Guide

iii
Catalyst 2960 Switch Hardware Installation Guide
OL-7075-09
CONTENTS
Preface vii
CHAPTER 1 Product Overview 1-1
Features 1-1
Front Panel Description 1-4
Catalyst 2960 Switch 24- and 48-Port Switches 1-4
Catalyst 2960-24-S, 2960-24TC-S, 2960-48TC-S, and 2960-48TT-S Switches 1-4
Catalyst 2960-24PC-L, 2960-24PC-S, 2960-24LC-S, 2960-24TC-L, 2960-48TC-L, 2960-24LT-L,
2960-24TT-L, 2960-48TT-L, 2960-48PST-L, and 2960-48PST-S Switches
1-6
Catalyst 2960G-24TC-L and Catalyst 2960G-48TC-L Switches 1-8
Catalyst 2960 8-Port Switches 1-9
Catalyst 2960PD-8TT-L Switch 1-9
Catalyst 2960-8TC-S, Catalyst 2960-8TC-L, and Catalyst 2960G-8TC -L Switches 1-10
10/100 Ports 1-11
10/100/1000 Ports 1-11
PoE Ports (Only Catalyst 2960 PoE Switches) 1-12
SFP Module Slots 1-13
Dual-Purpose Port 1-13
Power Input Port (Catalyst 2960PD-8TT-L Switch) 1-13
LEDs 1-14
System LED 1-15
RPS LED 1-16
Port LEDs and Modes 1-16
Dual-Purpose Port LEDs 1-18
Cable Guard for the Catalyst 2960 8-Port Switches 1-19
Rear Panel Description 1-19
Internal Power Supply 1-20
Cisco RPS 1-20
Cisco RPS 2300 1-20
Cisco RPS 675 1-21
Console Port 1-21
Security Slots 1-21
Management Options 1-22
Network Configurations 1-22

Cisco CATALYST 2960 Specifications

General

Manageable	Yes
Stacking	No
Model	Catalyst 2960 Series Switches
Power over Ethernet (PoE)	Available on some models (IEEE 802.3af)
VLANs	255 active VLANs
Features	QoS
Operating Temperature	32 to 113°F (0 to 45°C)
Relative Humidity	10% to 85% non-condensing
Power Consumption	Varies by model (30W to 400W)